Description
Heatmiser UH8-RF Wireless Wiring Centre – 8 Zone Underfloor Heating Control
The Heatmiser UH8-RF V2 Wireless Wiring Centre is an advanced 8-zone heating control unit designed for use with compatible Heatmiser wireless thermostats, including the neoAir and Slimline-RF ranges.
Ideal for multi-zone wet underfloor heating systems, the UH8-RF V2 provides centralised control of up to eight individual heating zones, with dedicated connections for 230V thermal actuators, an underfloor heating pump, manifold valve and boiler.
Its wireless thermostat connectivity makes it a practical solution for new installations, renovations and heating system upgrades where running thermostat cables would be inconvenient.
Key Features & Benefits
- 8-Zone Wireless Heating Control – Independently manage up to eight heating zones.
- Compatible with Heatmiser Wireless Thermostats – Works with supported neoAir and Slimline-RF models.
- 230V Actuator Outputs – Connect compatible thermal actuators on underfloor heating manifolds.
- Underfloor Heating Pump Control – Dedicated output for the UFH circulation pump.
- Manifold Valve Control – Operates a compatible heating zone valve when required.
- Volt-Free Boiler Output – Provides a heating demand signal to compatible boilers or other heat sources.
- Hot Water Output – Additional connection for compatible domestic hot water control.
- Underfloor Heating & Radiator Zones – Configure individual zones for different heating applications.
- Wireless Boiler Connection Option – Pair with a compatible Heatmiser RF-Switch V2 receiver where a wired boiler connection is impractical.
- LED Zone Indicators – Clearly display heating demand and operating status.
- Installer Test Functions – Help simplify commissioning and system checks.
- DIN Rail Mounting Option – Flexible installation near the underfloor heating manifold.
Wireless Control for Up to 8 Heating Zones
The Heatmiser UH8-RF V2 8 Zone Wiring Centre allows multiple rooms or heating areas to be controlled independently using compatible wireless thermostats.
Each paired thermostat communicates wirelessly with the wiring centre, which then activates the appropriate 230V actuator output when heating is required.
This makes the UH8-RF V2 particularly useful for properties with multiple underfloor heating zones, such as kitchens, living rooms, bedrooms and bathrooms.
With wireless thermostat communication, there is no need to run control cables from each room thermostat back to the wiring centre.
Please note: The wiring centre itself requires a 230V mains electrical supply.
Compatible with Heatmiser neoAir and Slimline-RF
The UH8-RF V2 is designed to work with compatible Heatmiser wireless room thermostats, including:
- Heatmiser neoAir V3 Wireless Thermostat
- Heatmiser Slimline-RF V3 Wireless Thermostat
- Other supported Heatmiser RF thermostat versions
The wiring centre receives wireless temperature control signals and operates the connected heating equipment accordingly.
For smartphone heating control, a compatible neoAir thermostat can be used with a suitable Heatmiser neoHub, sold separately.
Important: The UH8-RF V2 is not a WiFi device and does not connect directly to the Heatmiser neoApp.
Ideal for Wet Underfloor Heating Systems
The Heatmiser UH8-RF V2 is designed for compatible water-based underfloor heating installations.
Typically installed near the underfloor heating manifold, it provides central connections for:
- 230V underfloor heating thermal actuators
- Underfloor heating circulation pump
- Manifold zone valve
- Boiler or compatible heat source
- Domestic hot water controls
- Compatible wireless room thermostats
Up to six suitable actuators can be connected to each heating zone, subject to the wiring centre’s total electrical load limit.
The wiring centre can also accommodate compatible radiator heating zones, allowing different heating arrangements to be managed from one control unit.
Optional Wireless Boiler Connection
In installations where running a control cable between the underfloor heating manifold and boiler is difficult, the UH8-RF V2 can communicate wirelessly with a compatible Heatmiser RF-Switch V2 receiver.
This provides a convenient alternative to a wired boiler enable connection in suitable heating systems.
The RF-Switch receiver is sold separately.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Heatmiser |
| Model | UH8-RF V2 |
| Product Type | Wireless underfloor heating wiring centre |
| Number of Heating Zones | 8 |
| Hot Water Control | 1 output |
| Power Supply | 230V AC, 50Hz |
| Actuator Outputs | 230V AC |
| Maximum Relay Load | 3A resistive |
| M |




